|
Turn on/off headset |
|
(a) |
Turn On the headset |
| Constantly press Multifunction Button for 2 seconds until you hear a short beep. The LED will blink blue color. |
| (b) |
Turn Off the Headset |
| Constantly press Multifunction Button at 3 seconds until you hear a long beep. The LED will turn off. |
| Pairing Your Headset |
| This headset must use with Bluetooth bulit-in mobile phone .Configuration set up as below for the first time use. |
| (a) |
Keep headset and phone around 1 meter. |
| (b) |
Assure headset is turned off . |
| (c) |
Constantly press Multifunction Button until LED blinks red and blue in turn. |
| (d) |
Initiate Buletooth function of phones & search for Bluetooth devices. |
| (e) |
Phone will start searching for Bluetooth devices.If it's
successful ,phone screen will show the name of obtained device-"DKH-03".Press "Yes" to pair this headset to the phone. |
| (f) |
Input ID code of headset-"0000".Press "Yes" to complete pairing. Meanwhile, This headset is under Stand-by mode-BLUE LED blinks 5 times then having a long beep. |
| (g) |
Back to main manual of phone.Headset is under Stand-By mode and ready for Bluetooth communication.Please locate this headset within 10 meters(max.) to phones. |
| Notice: If pairing process can't complete within 2 minutes,LED will blink red color with 3 beeps. Finally,headset will turn off automatically .Please follow up above steps to repairing again . |
| Link headset with phone |
| Once pairing is successful,headset is under Stand-By mode. Owing to different phone has different program,please refer to procedure as below . |
| When a call is in or dial out a call ,phone will link headset automaitcally. If mobile phone has voice activation function,user can talk to mic .of this headset for voice dialing or redial out the last phone number. |
| (a) |
When a call is in or dial out a call, phone will link headset automatically .If phone has been cut off link to headset ,reconnect procedure as below . |
| (1) |
Press Multifunction Button .Headset will be reconnected to phone and press "yes" on the phone to accept reconnect mode. |
| (2) |
Operate phone manual to Bluetooth function and then into program of paired device and select "DKH-03". |
| (B) |
When headset is under Standby mode but can't pick up/dial out call, please follow up procedure as below for reconnect. |
| (1) |
Press Multifunction Button .Headset will be reconnected to phone and press "yes" on the phone to accept reconnect mode. |
| (2) |
Operate phone manual to Bluetooth function and then into program of paired device and select "DKH-03". |
|
To Use Headset
To Answer a Call
|
| When a call is in, a ringing tone will come out of this headset. Press Multifunction Button to answer a call. |
| To Cut off a call |
| Under talking status,press Munltifunction Button to cut off a call. |
| Vocie Activation : |
| Under stand-By mode,press Multifunction Button to enture Bluetooth connection mode. User will hear a beep then headset is available to use voice activation function. |
| Notice: |
| (1) |
Before using voice activation, please assure phone having built-in this function.(Voice activation is subject to phones bulit-in with voice activation function and refer to voice dialling procedure of individual phone.) |
| (2) |
Under stand-By mode,press two times of Multifunction Button continuously , headset will dial out the last phone call. |
| Volume Adjustment : |
| Simply adjust the bulit-in volume switch to adjust volume. |
| To Reset the Headset |
| You may want to reset the headset to original setting .This also clears all current pairings. |
| (1) |
Assure the headset is OFF. |
| (2) |
Constantly press the Volume Key until LED blinks red and blue color in turn. |
| (3) |
Release the Volume Key. |
| (4) |
Constantly press the Volume Key again until you hear 2 beeps. |
| (5) |
Recharge power to the headset for a few seconds. |
| (6) |
The headset will turn off and returns to the original setting mode.All of previous pairing data are cleared. |
|
For example NK- 6230 |
|
step1 |
WE ACCEPT 
